Sintered hardmetals analysis

Sintered hardmetals analysis

The test method specifies determination of Ti, Ta, Co, Nb, W, Fe in complicated carbides, hardmetal carbide mixtures and preliminary sintered hardmetals.
Submit request
The sample material for analysis is powder. The sample material is grinded to the particle size less than 70 micron with a grinder, which doesn’t infect the specimen with elements of interest. Then the sample material is pressed in a boron acid cup.
Boron acid cup is pressed out with a shaped punch being at least 3 mm deep. Sample material is put into the cup and pressed with a flat punch into a pellet.
The pellet put into the sample holder and then into spectrometer. Analysis is carried out automatically according to the chosen program. The program can determine all elements (oxides) listed in the test method or some of those elements by choice.
The standard test method includes analysis according to ISO  4503-78 with fusing the sample material with borate flux and to ISO 4883-78, when the sample material is dissolved and the solution is analyzed.
The standard test method specifies element mass content determination in the ranges listed in the table:

ElementMass content range, %
Ti
1,0 -40,0
Ta
0,1 - 35,0
Co
1,0 - 60,0
Fe
0,01 - 3,0
Nb
0,05 - 15,0
W
45,0–95,0
Laboratory grinder LDI-65
desk top laboratory grinder. The grinder is used for uniform grinding of sample material. The grinder is recommended for powder sample preparation for XRFA.
It provides required particle size, and uniform grinding. The grinding plates do not introduce additional elements into the sample material, therefore does not add errors to analysis.
istiratel.gif
Hydraulic laboratory press PGR - 10
desk top manually operated hydraulic press is recommended for powder sample pressing to improve analysis results.
There are two modifications differ in available stresses – either from 0 to 10 ton or from 0 to 20 ton.
The modification is chosen dependent on the material for analysis and customer analytical task.
The delivery set includes molders of various diameters dependent on the analytical task.
ПГР - 10

20.jpg

Agate mortar
The mortar is used for manual suspension and powder grinding, as well as for mixing small portions of substances used in scientific research.

stupka.jpg

Back to list

All of the images and information are the property of company © 1996-2024 year